CollegeRoad Electronics – Your trusted online store in Pakistan for quality electronics, project components, and expert technical services at unbeatable prices for more info +923075322058
NUCLEO F103RB Board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The AT89C51 is an 8-bit microcontroller developed by Atmel (now part of Microchip Technology), based on the Intel 8051 architecture. It features 4KB of Flash programmable and erasable read-only memory (PEROM), 128 bytes of internal RAM, and operates at a clock frequency of up to 24 MHz. This microcontroller includes 32 programmable I/O lines, two 16-bit timers/counters, a full-duplex UART for serial communication, and five interrupt sources. Housed in a 40-pin Dual In-line Package (DIP), the AT89C51 is ideal for embedded system applications, including control systems, consumer electronics, and educational development boards. It supports standard 8051 instruction sets and is compatible with most 8051 development tools and compilers.
Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller is a high-performance, low-power controller from a microchip. Atmel ATMEGA328P Arduino is like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with an external crystal. The package can be Arduino programmed in a circuit. 1.8V to 5V operating voltage. Atmega328p programming controller is an 8-bit microcontroller based on AVR RISC architecture. Atmega-328p ic chip is the most popular of all AVR controllers as it is used in ARDUINO boards.
The ESP32 Development Board is a powerful, low-cost microcontroller module with integrated Wi-Fi and Bluetooth connectivity.
Built on TSMC 40nm low-power technology, the ESP32 delivers best-in-class RF performance, making it safe, reliable, and scalable
for a wide range of IoT and embedded applications. Its compact design integrates antenna, RF balun, power amplifier, filters, and power management module,
all in a single board solution — saving PCB space while ensuring robust wireless communication.
With its dual-core Tensilica LX6 microcontroller running at up to 240 MHz, built-in 520 KB SRAM,
and support for 802.11 b/g/n Wi-Fi and Bluetooth (Classic + BLE),
the ESP32 is perfect for IoT, smart home devices, wearables, industrial automation, robotics, and sensor networks.
The STM32 Nucleo-32 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller.
High-performance ARM Cortex‑M4 32-bit microcontroller with FPU, running at up to 84 MHz. Features include 512 KB Flash, 96 KB SRAM, USB OTG FS, multiple timers, USART, SPI, I²C, and 12-bit ADC. Ideal for embedded systems, IoT, and high-speed control applications. Available in LQFP and UFQFPN packages. Supported by STM32Cube and compatible with Arduino STM32 cores.
The NUCLEO-L401RE STM32 Nucleo Development Board is a powerful and cost-effective platform for developers and hobbyists. It features the STM32L401 microcontroller with built-in ST-LINK/V2-1 debugger, Arduino™ and ST Morpho headers for easy expansion, and full support for STM32 HAL libraries and mbed development tools — making it ideal for rapid prototyping and embedded system projects.
The Original NVIDIA Jetson Nano 4GB Developer Kit is an excellent entry-level edge AI platform that combines powerful GPU acceleration, low power operation, and a mature AI software ecosystem. It is especially suited for developers who want to move beyond experimentation and build real-world AI-enabled embedded products.
The Original NVIDIA Jetson Nano Developer Kit (4GB) is a compact and powerful edge AI computer designed for real-time artificial intelligence applications. Powered by a 128-core NVIDIA GPU and a quad-core ARM CPU, it delivers up to 472 GFLOPS of performance while operating at just 5–10W. Ideal for computer vision, robotics, IoT, and embedded AI projects, it supports popular frameworks like TensorFlow and PyTorch through NVIDIA JetPack.
For Software Download Visit https://developer.nvidia.com/embedded/jetpack
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
STM32F407VGT6 microcontroller featuring 32-bit Arm® Cortex®-M4 with FPU core, 1-Mbyte Flash memory and 192-Kbyte RAM in an LQFP100 package
USB OTG FS
ST MEMS 3-axis accelerometer
ST-MEMS audio sensor omni-directional digital microphone
Audio DAC with integrated class D speaker driver
User and reset push-buttons
Eight LEDs:
LD1 (red/green) for USB communication
LD2 (red) for 3.3 V power on
Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
Two USB OTG LEDs, LD7 (green) VBUS and LD8 (red) over-current
UNI-T UTP3305-II DC Power Supply ₨ 59,500
NUCLEO F103RB Board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The AT89C51 is an 8-bit microcontroller developed by Atmel (now part of Microchip Technology), based on the Intel 8051 architecture. It features 4KB of Flash programmable and erasable read-only memory (PEROM), 128 bytes of internal RAM, and operates at a clock frequency of up to 24 MHz. This microcontroller includes 32 programmable I/O lines, two 16-bit timers/counters, a full-duplex UART for serial communication, and five interrupt sources. Housed in a 40-pin Dual In-line Package (DIP), the AT89C51 is ideal for embedded system applications, including control systems, consumer electronics, and educational development boards. It supports standard 8051 instruction sets and is compatible with most 8051 development tools and compilers.
Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller is a high-performance, low-power controller from a microchip. Atmel ATMEGA328P Arduino is like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with an external crystal. The package can be Arduino programmed in a circuit. 1.8V to 5V operating voltage. Atmega328p programming controller is an 8-bit microcontroller based on AVR RISC architecture. Atmega-328p ic chip is the most popular of all AVR controllers as it is used in ARDUINO boards.
ATmega32A, ATMEL microcontroller, 8-bit AVR, 32KB flash MCU, ATmega32, Collegeroad Electronics, AVR development, embedded systems, robotics microcontroller, AVR controller, Arduino compatible chip
The ESP32 Development Board is a powerful, low-cost microcontroller module with integrated Wi-Fi and Bluetooth connectivity. Built on TSMC 40nm low-power technology, the ESP32 delivers best-in-class RF performance, making it safe, reliable, and scalable for a wide range of IoT and embedded applications. Its compact design integrates antenna, RF balun, power amplifier, filters, and power management module, all in a single board solution — saving PCB space while ensuring robust wireless communication. With its dual-core Tensilica LX6 microcontroller running at up to 240 MHz, built-in 520 KB SRAM, and support for 802.11 b/g/n Wi-Fi and Bluetooth (Classic + BLE), the ESP32 is perfect for IoT, smart home devices, wearables, industrial automation, robotics, and sensor networks.
The STM32 Nucleo-32 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller.
The Original NVIDIA Jetson Nano 4GB Developer Kit is an excellent entry-level edge AI platform that combines powerful GPU acceleration, low power operation, and a mature AI software ecosystem. It is especially suited for developers who want to move beyond experimentation and build real-world AI-enabled embedded products. The Original NVIDIA Jetson Nano Developer Kit (4GB) is a compact and powerful edge AI computer designed for real-time artificial intelligence applications. Powered by a 128-core NVIDIA GPU and a quad-core ARM CPU, it delivers up to 472 GFLOPS of performance while operating at just 5–10W. Ideal for computer vision, robotics, IoT, and embedded AI projects, it supports popular frameworks like TensorFlow and PyTorch through NVIDIA JetPack. For Software Download Visit https://developer.nvidia.com/embedded/jetpack
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.